Sequential and systematic sampling plans for the Markov‐dependent production process

Acceptance sampling plans are used to assess the quality of an ongoing production process, in addition to the lot acceptance. In this paper, we consider sampling inspection plans for monitoring the Markov‐dependent production process. We construct sequential plans that satisfy the usual probability requirements at acceptable quality level and rejectable quality level and, in addition, possess the minimum average sample number under semicurtailed inspection. As these plans result in large sample sizes, especially when the serial correlation is high, we suggest new plans called “systematic sampling plans.” The minimum average sample number systematic plans that satisfy the probability requirements are constructed. Our algorithm uses some simple recurrence relations to compute the required acceptance probabilities. The optimal systematic plans require much smaller sample sizes and acceptance numbers, compared to the sequential plans. However, they need larger production runs to make a decision. Tables for choosing appropriate sequential and systematic plans are provided. The problem of selecting the best systematic sampling plan is also addressed. The operating characteristic curves of some of the sequential and the systematic plans are compared, and are observed to be almost identical. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 451–467, 2001     

Asymptotically optimal component assembly plans in repairable systems and server allocation in parallel multiserver queues

T identical exponential lifetime components out of which G are initially functioning (and B are not) are to be allocated to N subsystems, which are connected either in parallel or in series. Subsystem i, i = 1,…, N, functions when at least K_i of its components function and the whole system is maintained by a single repairman. Component repair times are identical independent exponentials and repaired components are as good as new. The problem of the determination of the assembly plan that will maximize the system reliability at any (arbitrary) time instant t is solved when the component failure rate is sufficiently small. For the parallel configuration, the optimal assembly plan allocates as many components as possible to the subsystem with the smallest K_i and allocates functioning components to subsystems in increasing order of the K_i's. For the series configuration, the optimal assembly plan allocates both the surplus and the functioning components equally to all subsystems whenever possible, and when not possible it favors subsystems in decreasing order of the K_i's. The solution is interpreted in the context of the optimal allocation of processors and an initial number of jobs in a problem of routing time consuming jobs to parallel multiprocessor queues. © John Wiley & Sons, Inc. Naval Research Logistics 48: 732–746, 2001     

Preservation of unimodality under shock models

A number of results pertaining to preservation of aging properties (IFR, IFRA etc.) under various shock models are available in the literature. Our aim in this paper is to examine in the same spirit, the preservation of unimodality under various shock models. For example, it is proved that in a non-homogeneous Poisson shock model if {p_k}_K≥0, the sequence of probabilities with which the device fails on the kth shock, is unimodal then under some suitable conditions on the mean value function Λ (t), the corresponding survival function is also unimodal. The other shock models under which the preservation of unimodality is considered in this paper are pure birth shock model and a more general shock model in which shocks occur according to a general counting process. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 952–957, 1999     

马克思主义中国化的历史进程及其启示

马克思主义中国化的历史进程波澜壮阔，绚丽多彩。马克思主义的中国化，不仅使中华民族以独立的姿态重新屹立于世界民族之林，使中国人民真正当家做主人，而且引领中华民族走上实现伟大复兴的康庄大道。马克思主义的中国化给我们留下了许多有益的启示。     

一步法制备石蜡微胶囊的中试研究及性能表征

采用一步法在100L反应釜内进行石蜡微胶囊制备的中试，表征了石蜡微胶囊的微胶囊化率、粒径和热性能，探讨了中试工艺对产品性能的影响。结果表明中试产品与实验室小试产品的性能基本接近。中试石蜡微胶囊的微胶囊化率为70％，平均粒径为54．0μm，相变范围为40～80℃，相变峰值和热焓分别为65℃，114J／g，分解温度达250℃。     

软件保障性评估在维修性分配和预计软件中的应用

从软件保障性的影响要素——软件生命周期过程、软件自身的设计特性和保障资源出发，阐明了软件保障性评估的原理，提出了一套软件保障性评估方案。通过在某维修性分配和预计软件上的具体实践，充分验证了该评估方案的可行性和实用性。     

基于G-AHP的非致命性武器驱散效能评估

定义了非致命性武器驱散效能的概念;根据非致命性武器的研发目的和应用实际,对影响其驱散效能的各相关因素进行逐层递阶划分,建立了较为全面的指标评估体系;提出非致命性武器效能G-AHP评估方法,借鉴专家经验,实现了非致命性武器装备驱散效能的量化评估;案例计算结果符合实际,验证了灰色层次分析法的可行性,为下一步有针对性地使用非致命性武器,提供了有力的科学依据。     

Experimental study on the detonation process of a pulse detonation engine with ionized seeds

An experimental platform of a pulse detonation engine (PDE) was established to study the effect of different K₂CO₃ ionized seed mass contents on the detonation process. The pressure and ion concentration were detected in the detonation process of the PDE with different contents of ionized seeds. The initiation process of the PDE at different ignition frequencies was studied. The results show that the gas conductivity in the detonation process increased by adding ionized seeds to the PDE tube, and the conductivity increased with the increase in ionized seed mass content. With the increase in ionized seed mass content, the range of the conductivity decreased. The PDE was successfully ignited and formed a stable detonation wave at ignition frequencies of 5 Hz and 10 Hz, and the peak pressure of the stable detonation with the ignition frequency of 5 Hz was 17% higher than that with an ignition frequency of 10 Hz. The detonation wave intensity was weakened and degenerated to a shock wave that propagated in the tube without the fuel filled at the ignition frequency of 20 Hz.     

战场通信网络消息处理模型研究*

针对战场通信网络建模需求,基于 EBI建模框架,提出了面向实体的战场通信网络建模方法,探讨了战场通信网络实体模型的组成结构.重点分析了战场通信网络消息处理模型的作用和功能,给出了消息处理模型的仿真工作流程,对消息处理模型中的消息列表、通信事件列表、网络路由算法进行了阐述,并结合通信节点实体模型中的消息缓冲器,探讨了消息处理模型管理和维护通信事件列表的方法.     

论消防部队基本建设跟踪审计过程控制

针对基本建设审计特点，提出逐步从规范基本建设审核审批程序入手，进行基建建设前期、施工中及结算、决算跟踪审计，发挥审计监督的机制性作用，达到基本建设活动全过程运作规范、有序、监督有效。